USB2.0/IEEE1394 Combo PCI
Board PCIU2FW
(The product name PCIFU2 is changed to
PCIU2FW.)
|
|
|
|
|
Adds two
USB2.0 ports and two
IEEE1394/FireWire ports simply.
|
|
|
Features |
- Adds two High Speed USB2.0 ports(480Mbps) and two
IEEE1394/FireWire ports(400Mbps) to your desktop PC or Mac.
- EHCI(USB2.0) and OHCI(USB1.1) compliant host adapter PCI
board.
- Included original USB2.0 Driver for Windows
Me/2000/98SE.
- Included original USB2.0 Hub Driver for Windows
Me/2000/98SE.
- Fully compatible with Microsoft standard USB2.0 driver
for WindowsXP.
- Supports Low/Full/High
Speed(1.5/12/480Mbps).
Switches automatically to the
highest supported speed of the attached USB device and
USB2.0 Hub.
- Supports Low/Full Speed (1.5/12Mbps) with Apple USB
Supports drivers.
- Allows using USB1.1 and USB2.0 peripherals
simultaneously.
- Supports Plug & Play and Hot-Swappable USB1.1/2.0
device and USB2.0 Hub.
- Full USB Bus Power(500mA) at each port.
- Adds three ports to the front panel.
(Requires
3.5inch front-bay attachment Sold Separately)
- IEEE1394.2000 and OHCI1.0 compatible one-chip controller
chip.
- Fully compatible with Microsoft Windows standard
IEEE1394 OHCI drivers.
- Fully compatible with Apple standard FireWire drivers
for MacOS9.x and MacOSX 10.x.
- Fully compatible with Apple standard application
software.
iMovie, iTunes, iPod , Disk burner and Final
Cut Pro Ready! *Important notice
to iPod owners. Must connect HDD-Extension
Power cable to PCIU2FW to provide Power to iPod through the
FireWire cable.
- PCI 2.2 and PCI PowerManagement 1.1 compliant.
- 5 years warranty.
|
| |
|
|
System
Requirements |
| |
Windows |
|
PC with one free PCI2.1/2.2 compliant slot. -
Windows 98SE/2000/Me/XP. - ACPI BIOS. |
| |
Mac |
|
Power Macintosh G4/G3 Series, Power
Macintosh 9600/9500/8600/8500/7600/7300 Series with one
free PCI slot. - MacOS 9.1/9.2.x/10.1 or later. |
| |
|
*PCIU2FW works as the USB1.1 compatible host adapter with
Apple USB Support drivers and works with Apple FireWire
drivers. Not support USB2.0 High speed on Mac. *G3 300MHz
Processor or higher is recommended for better
performance. | |
Specifications
|
| Bus interface |
PCI Local Bus Rev.2.2 |
| Data transfer rate |
<USB2.0>
480/12/1.5Mbps <IEEE1394> 400/200/100Mbps |
| Physical Dimensions |
130 (L) x 100 (W) mm (PCI Full Height Half
size) |
| Electrical |
+5v/+12V |
| Package includes |
- PCIFU2 USB2.0/1.1 and IEEE1394/FireWire
host adapter
PCI board. Two USB2.0(Type A) ports and
two IEEE1394/FireWire(6 pin) ports.
- USB2.0 EHCI Hub Driver Software CD-ROM.
- Installation guide.
|
| Operating requirements |
-Temperature 0 to 55°C -Relative
humidity 95%
Max.(Non-condensing) |
Kontakta Nimax AB för närmare information.Tillbaka |